ENEDO.png

MHE High Efficiency Rectifiers for DC Power Systems

Key features

  • Efficiency up to 97%

  • Fan-free convection cooling

  • MTBF 1800000h @ 25 Deg C, Telcordia SR-332

  • Standard output variants 24, 48, 60, 110, 125 and 220 VDC

  • 2000 W output power, 1500 W at 24 V

  • Input voltage range 85 – 300 VAC

  • Digital communication over CAN bus with VIDI master controller

  • Flexible design with full front cabling

  • EMC Standards:

  • Generic EN 61000-6-1/ -2/ -3/ -4

  • Power Utility EN 61000-6-5

  • Railway EN 50121-4on coordination

Enedo MHE high Efficency.png

OPUS EIM Inverter Systems

  • Support for 24, 48, 60, 110, 125 & 220 VDC nominal battery voltages

  • Standard 19″ rack-mount

  • Small size, light weight

  • Full front access

  • Remote monitoring

  • Very high efficiency to 90%

  • Hot swap N+1 redundancy

  • Static switch with online and offline modes

  • High overload capacity

  • Parallel from 1000VA to 24kVA

opus-eim-inverter-system_0_0-1-e15817791

OPUS C DC Power Systems

  • Natural convection

  • Models for 24, 48, 60, 110, 125 & 220 VDC

  • Max 19.2 kW output power

  • N+1 redundant operation

  • Plus or minus grounded or floating

  • Battery connection: 1 string with full current: MCB or MCCB

  • Load distribution modules (optional)

  • Bottom entry cabling optional

  • Optional IP21 kit and drip cover

  • Safety: IEC/EN 60950-1

OPUS C DC Power Systems.png

RCB1200 Configurable Multi-Output Power Supplies

  • Configurable from 5 to 16 outputs

  • Up to 1200 W output power

  • Input surge current limiting (<40A)

  • High power density (23W/in3)

  • Compact form factor

  • 6.09″ x 6.05″ x 1U (154 x 155 x 41 mm)

  • Universal input voltage (85 – 264 VAC)

  • Active PFC EN61000-3-2 compliant

  • No line derating above 120 VAC

  • Fan speed control function for quiet operation

  • Output module parallel operation

  • Output current monitoring signal

  • Double power chassis

  • +5V, 200mA bias supply

rcb1200-multi-output-power-supply-1-e158

ENEDO'sMedical Grade Power Supplies

Adherence to stringent safety standards is critical in the design and production of medical grade power supplies. Efore's portfolio of medical grade power solutions meets the latest IEC/EN 60601-1 safety standards, including 2x MoPP certifications and BF apparatus compliance. By using pre-approved products, designers can eliminate risks and speed compliance, without jeopardizing target launch dates.

MCB600

The MCB600 is a highly configurable medical grade power supply series that provides unrivalled performance and flexibility. Delivering 600 W and up to 8 outputs from a 5 x 3 x 1.6" (78 x 144 x 41mm) package, the MCB600 is one of the smallest commercially available configurable power solutions on the market today.

DDP600

ENEDO's DDP600 series medical grade power supplies provide reliable and efficient functionality for today’s high power medical equipment needs. Conforming to the 3rd edition of the IEC 60601-1 safety standard for medical equipment, the DDP600 provides 2xMoPP means of patient protection and is suitable for BF rated applied parts under certain conditions

MDP400

ENEDO's standard and customized medical grade power supplies are certified to the latest IEC/EN 60601-1 MOOP and MOPP safety standards for isolation/separation and low leakage current. Our products are used today for Patient Handling & Monitoring, Imaging Equipment, Sterilization Equipment and Surgical Lighting.

Address

4900 Monaco St, Commerce City, CO 80022, USA

Contact

(303) 289-4743

©2018 by Waco Electronics Inc.